ASME 16.11 Forged Fittings are available as Socket Weld Pipe Fittings and Threaded Pipe Fittings. Forged fittings are made from A105 (Carbon Steel), stainless steel, or nickel-base alloy. Forged Threaded Fittings are thicker, heavier, and are intended for heavy industrial use.

Cast-iron Pipe Fittings are available in 2000#, 3000#, 6000#, and 9000# pressure classes. These Forged Threaded Fittings are more common in 3000# and 6000# (90% of the time).

Find more details at our FORGED FITTINGS PAGE HERE

Forged Fittings Manufacturer – Socket Weld Fittings, Threaded Fittings: Forged Iron Threaded or Socket Weld Fittings are costlier in sizes bigger than 2 inches (ca. 5 cm) compared to their malleable iron or butt weld counterparts.

Threaded Pipe Fittings and Socket weld Pipe Fittings are available up to 4 inches (ca. 10 cm) nominal pipe size. See the table below for the pressure and temperature rating of those Fittings.

Forging steel is a process that makes very strong fittings. The heated steel is then machined into the forged steel fitting.

Check what other says about Creative pipings.

 Manufacturing Standards

• ASME B16.11 – Socket Welding and Threaded Forged Fittings.

• MSS SP-43 – Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications.

• MSS SP-95 – Swage(d) Nipples and Bull Plugs.

• BS3799 – Specification for Steel pipe fittings, screwed and Socket-welding for the petroleum industry.

• ASTM A182 – ASME SA182 – Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings.

The post Forged Fittings Manufacturer – Socket Weld Fittings, Threaded Fittings Creative Piping Solutions - Pipe Fittings & Flanges Manufacturer, work at the forefront of innovation+technology creativepiping.com appeared first on Creative Piping Solutions Forged, Pipe Fittings & Flanges Manufacturer.

Trusted #1 ASME B16.11 Forged Fittings Manufacturer Mumbai India: Looking for a trusted forged pipe-fitting Manufacturer near you, in your city, state, or country?
if Yes then that’s great! good news you have landed on the right page.

We have a good news for you we at “creativepiping.com” offering ASME B16.11 Forged Fittings at really affordable prices.

Also we would like to inform you that we are the best & leading ASME B16.11 Forged Fittings Manufacturer, Suppliers and most trusted exporter in steel industry in India.

Types of ASME B16.11 Dimensions we are offering at lowest price:
45 Degree Elbow Dimensions
90 Degree Elbow Dimensions
Bushing Dimensions
Cap Dimensions
Cross Dimensions
Full Coupling Dimensions
Half Coupling Dimensions
Hex Head Plug Dimensions
Round Head Plug Dimensions
Square Head Plug Dimensions
90D Street Elbow Dimensions
Tee Dimensions.

We guarantee that you will like the quality of our products and services and pricings.

Cities We Export and Supply Forged Steel Fitting

Countries We Export and Supply Forged Steel Fitting

Contact Details:
Call us on: + (91) – 22 6639 4505 / 22 6639 4506
Email us at: sales@creativepiping.com

Check what other say about us on Inkless diary and dudescreative

The post Trusted #1 ASME B16.11 Forged Fittings Manufacturer Mumbai India Creative Piping Solutions - Pipe Fittings & Flanges Manufacturer, work at the forefront of innovation+technology creativepiping.com appeared first on Creative Piping Solutions Forged, Pipe Fittings & Flanges Manufacturer.

Manufacturers of MSS SP-97 Branch Outlet Fittings, Welding Outlet Fittings, Nipple Outlet Pipe Fitting, Socket Weld Outlet Fitting, Threaded Outlet Fittings, Elbow Outlet Fitting in India.

Branch Connection Fittings:

Branch Connection Fitting is also named as Outlet fittings. Outlets are a family of forged products used to make 90 degree or 45 degrees integrally reinforced branch connections from a header pipe or run pipe to an outlet pipe or branch pipe. Outlet fittings have some outstanding advantages such as low cost, reliability and safety, standardization, simple construction, convenient design selection, and improved media flow channels. Outlets come with threaded, socket-weld, and butt-weld end connections. Branch fittings are available in all dimensions, bores, types (i.e. welding outlet, Nipple Outlet, Socket Weld Outlet, Threaded Outlet, Elbow Outlet), sizes, and classes, in a wide range of stainless steel, chrome-moly, and other alloys.

To place an outlet instead of the tee, A hole is cut in the side of the pipe, the Outlets are welded in place over the hole and then the additional length of pipe is attached to the outlet. Sometimes the run size is given as a possible range or consolidation. this means the outlet can be used on several different pipe sizes. for example, a 36-3 x 1 outlet could be used to branch 1″. pipe off of any run pipe from 3″ up through 36″.

Branch Outlet Fittings Specifications:

Manufacture Standards: MSS SP-97, BS3799, ASME B16.11, GB19236 etc.
Rate: 3000LBS~9000LBS / SCH10S ~ SCHXXS for butt-weld end.
Dimension: 1/2” to 24” (DN15 ~DN600).

Branch Outlet Fittings Materials:

Branch Fittings Types:

welding outlet Fittings:

Creative Piping Solutions designed and manufacture welding outlet Fittings to minimize stress concentrations and provide integral reinforcement. MSS-SP 97 welding outlet is the most popularly used branch connection fitting falling under the buttweld fittings family. Buttweld Outlets are available in a wide range of dimensions. It is well-suited for high-pressure weight applications. There are three pressure grade STD, XS, and Sch160 for the welding outlet.

Buttweld Branch Outlet is contoured to match the curve on the headed pipe and beveled on the branch side to mate up with a beveled piece of the branch pipe. We are leading producers of welding outlet using ASME B16.11, B16.9, ASME B16.25, and EN Standards. The most popular purchase materials of Welding Outlets are A105 and A234. We are the topmost exporters of Class 3000 Long welding outlet in the UK and UAE.

Nipple Outlet Pipe Fitting:

Nipple Outlet is mostly used for valve installation and exhaust. ASME B16.11 Nipple Outlets are manufactured in lengths ranging from 3.1/2 inches to 6.1/2 inches and for Sch 160, XS, and XXS schedules. ASTM A105 Nipple Outlet Manufactured for Extra Strong and Double Extra Strong applications in Class 6000, Clase 3000. Available with male-socket weld or male threaded outlets.

Socket Weld Outlet Fitting:

A MSS SP-97 Socket Weld Outlet has the same basic design as a welding outlet and Threaded Outlet where the major difference is that the branch pipe is connected to the run pipe, via the fitting, with a socket weld connection as per ASME B16.11. Socket Weld Outlets belong to the “socket fittings” family and are available in Class 3000, Class 6000, and Class 9000. ASTM A182 and A105 Socket Weld Outlet are used for lower pressure applications, and smaller pipe diameters (as compared to welding outlets).

Threaded Outlet Fittings:

MSS SP 97 Threaded Outlet and ASME B16.11 Threaded Outlet is a type of branch connection and it is threaded without welding. Threaded Outlets are used for low-pressure 90-degree pipe branches. The threading is generally of the NPT type and conforms to the ASME B1.20.1 specification. A105 Threaded Outlet is available in the size range of 1/2″ to 2″ and is welded over a hole either drilled or burned in the pipe. The pressure s usually Class 3000 and Class 6000.

Threaded Branch Outlet is contoured to match the curve of the header pipe and the branch side of the fitting has an NPS thread according to ASME B1.20.1. Normally, Thread Branch Outlet Fittings are used for NPS under 2″. Creative Piping Solutions is ISO certified supplier and exporter of Threaded Outlet Fittings in the UK, UAE, and Australia.

Elbow Outlet Fitting:

We are manufacturers of Elbow Outlet Branch Fittings using ASME B16.9 and MSS SP-97 Standards. Elbow Outlet is used to provide branch connections on 90 or 180 degrees short radius elbows(seldom used) or long radius elbows(most common). Elbow Outlets are available with socket weld/threaded connections or with butt weld connections in class 3000 or class 6000.

Branch Outlet Fittings Gallery:

How to determine outlet type:

Class Vs Type of Outlet Fittings (MSS SP-97):

How to order Branch Fitting:

• Header run pipe size. For Example in range of 36-22 size.
• Branch pipe size for example 6 inches, i.e. NPS of the connecting pipe to the run pipe.
• Branch pipe schedule for buttweld types of connections (check specification section for schedule range). Note: rating shall be provided for NPT threaded and socket weld Outlets
• Style of branch fitting (for example: welding outlet, Nipple Outlet, Socket Weld Outlet, Threaded Outlet, Elbow Outlet)
• Material Grades for example ASTM A105, ASTM A182, A234.

The post Branch Connection Fittings Manufacturers Creative Piping Solutions - Pipe Fittings & Flanges Manufacturer, work at the forefront of innovation+technology creativepiping.com appeared first on Creative Piping Solutions Forged, Pipe Fittings & Flanges Manufacturer.