Stainless Steel Flanged Concentric Reducer Manufacturer

Share
by Creative Piping

Stainless Steel Flanged Concentric Reducer Manufacturer, SS Double Flanged Concentric Reducer Suppliers

Stainless Steel Flanged Concentric Reducer Manufacturer

ISO Certified Suppliers and Exporters of SS 304L Flanged Concentric Reducer, Stainless Steel 304 Double Flanged Concentric Reducer, Stainless Steel 317L Industrial Flanged Reducer, SS 321 Concentric Flanged Fittings, 310 SS 125# Flanged Concentric Reducer, WNR 1.4306 Flanged Ductile Iron Concentric Reducer, UNS S30403 Concentric Reducer Flanged Fittings in India.

Largest stockists of 316 Stainless Steel Concentric Flanged Fittings, SS 316L 125# Cast Iron & 150# Ductile Iron, Stainless Steel 317 Lined Flanged Concentric Reducers, UNS S30400 Concentric Flanged Reducer, WNR 1.4301 Cast Iron Concentric Reducer, WNR 1.4404 Stainless Steel Flanged Concentric Reducer, DIN 1.4401/1.4404 Flanged Concentric Reducer, SS 410 Double Flanged Reducer, Stainless Steel 446 Concentric Flanged Reducer, 904L Stainless Steel Flanged Ductile Iron Concentric Reducer.

Creative Piping Solutions is one of the leading Manufacturers, Suppliers, and Exporters of high-quality Stainless Steel 304 Flanged Concentric Reducers in India. We offer this 304L SS Flanged Concentric Reducer in various types, wall thickness, material grades, and sizes as per the client’s requirements. We offer these SS 316 Flanged Concentric Reducer Fittings at the foremost competitive prices. SS 317L Flanged Eccentric reducers are available in most of the sizes listed. 317 SS Flanged Concentric Reducers are the universal solutions for all changes in the nominal pipe size. Counting on the nominal width, the reducers are lined with PTFE, PFA.

The Two Flanges on most Concentric Reducers have a special number of bolt holes and everyone adjacent bolt holes. don, The centerline of the reducer is marked by notches on the circumference of every flange, and installation must be made regarding this centerline. This is able to even be applicable to most reducing flanges and reducing flange fillers. Failure to assemble with the centerline at 12 o’clock will end in downstream equipment, bends not bolting correctly. The dimensions and weights of SS 316L Flanged concentric and eccentric reducers are normally equivalent. If the order does not specify a Flanged eccentric reducer, then a SS 321 Flanged concentric reducer is going to be furnished.

Stainless Steel Flanged Concentric Reducer Specifications

  • Size 8 in. x 6 in.
  • Material 125 lb. Cast Iron
  • Type Concentric Reducer
  • Weight 73.63 LBS
  • Dimensions DIN PN10/16, BS 10, ASME 150 / 300, Mixed

Lining Materials:

  • PTFE (virgin or conductive)
  • PFA (virgin or conductive)
  • PP

SS Flanged Concentric Reducer according to EN 1092-1:

  • fix-fix
  • fix-loose
  • loose-loose

Other pressure levels:

  • PN 16
  • PN 25
  • PN 40

Stainless Steel Concentric Flanged Fittings, 125# Cast Iron & 150# Ductile Iron

  • Flanged fittings UL Listed through 12”
  • Castings conform to ASTM A126 and ASTM A48
  • Dimensions conform to ASME B16.1 and ANSI/AWWA C110/A21.10
  • Flanged fittings made of 150# ductile iron for sizes 6” and below
  • Manufacturing facility is ISO Certified
  • Galvanizing available upon request

Stainless Steel Flanged Concentric Reducer Dimensions

Stainless Steel Flanged Concentric Reducer Dimensions
To Suit Pipework NB Liner Thickness  Face – face A
Large Bore Small Bore
Inches mm Inches mm mm mm
3/4″ 20 1/2″ 15 2.0 114
1″ 25 1/2″ 15 2.0 114
1″ 25 3/4″ 20 3.0 114
1.1/2″ 40 1″ 25 4.0 114
2″ 50 1″ 25 4.0 127
2″ 50 1.1/2″ 40 4.5 127
3″ 80 1″ 25 4.0 152
3″ 80 1.1/2 40 4.5 152
4″ 100 2″ 50 4.8 178
4″ 100 3″ 80 6.5 178
6″ 150 2″ 50 4.8 229
6″ 150 3″ 80 6.5 229
6″ 150 4″ 100 9.0 229
8″ 200 4″ 100 9.5 279
3″ 80 2″ 50 4.8 152
4″ 100 1″ 25 4.0 178
4″ 100 1.1/2 40 4.5 178
12″ 300 8″ 200 10 356
8″ 200 6″ 150 9.5 279
10″ 250 6″ 150 10 305
10″ 250 8″ 200 10 305

Available grades of Flanged Concentric Reducer

  • Stainless Steel 304 Flanged Concentric Reducer
  • Stainless Steel 304L Flanged Concentric Reducer
  • Stainless Steel 304H Flanged Concentric Reducer
  • Stainless Steel 310 / 310S Flanged Concentric Reducer
  • Stainless Steel 310H Flanged Concentric Reducer
  • Stainless Steel 316 / 316L Flanged Concentric Reducer
  • Stainless Steel 316Ti Flanged Concentric Reducer
  • Stainless Steel 317 Flanged Concentric Reducer
  • Stainless Steel 317L Flanged Concentric Reducer
  • Stainless Steel 347 Flanged Concentric Reducer
  • Stainless Steel 347H Flanged Concentric Reducer
  • Stainless Steel 410 Flanged Concentric Reducer
  • Stainless Steel 446 Flanged Concentric Reducer
  • Stainless Steel 904L Flanged Concentric Reducer

Stainless Steel Flanged Concentric Reducer Equivalent Grades

Stainless Steel Concentric Flanged Reducer International Standards

USA France Germany Germany Italy Japan Russia Spain Sweden UK European Union
AISI AFNOR DIN 17006 W.N. 17007 UNI JIS GOST UNE SIS BSI EURONORM
201 SUS 201
301 Z 12 CN 17-07 X 12 CrNi 17 7 1.4310 X 12 CrNi 1707 SUS 301 X 12 CrNi 17-07 23 31 301S21 X 12 CrNi 17 7
302 Z 10 CN 18-09 X 5 CrNi 18 7 1.4319 X 10 CrNi 1809 SUS 302 12KH18N9 X 10 CrNi 18-09 23 31 302S25 X 10 CrNi 18 9
303 Z 10 CNF 18-09 X 10 CrNiS 18 9 1.4305 X 10 CrNiS 1809 SUS 303 X 10 CrNiS 18-09 23 46 303S21 X 10 CrNiS 18 9
303 Se Z 10 CNF 18-09 X 10 CrNiS 1809 SUS 303 Se 12KH18N10E X 10 CrNiS 18-09 303S41
304 Z 6 CN 18-09 X 5 CrNi 18 10 X 5 CrNi 18 12 1.4301 1.4303 X 5 CrNi 1810 SUS 304 08KH18N10 06KH18N11 X 6 CrNi 19-10 23 32 304S15 304S16 X 6 CrNi 18 10
304 N X 5 CrNiN 1810 SUS 304N1
304 H X 8 CrNi 1910 SUS F 304H X 6 CrNi 19-10
304 L Z 2 CN 18-10 X 2 CrNi 18 11 1.4306 X 2 CrNi 1911 SUS 304L 03KH18N11 X 2 CrNi 19-10 23 52 304S11 X 3 CrNi 18 10
Z 2 CN 18-10-Az X 2 CrNiN 18 10 1.4311 X 2 CrNiN 1811 SUS 304LN 23 71
305 Z 8 CN 18-12 X 8 CrNi 1812 SUS 305 X 8 CrNi 18-12 23 33 305S19 X 8 CrNi 18 12
Z 6 CNU 18-10 SUS XM7 X 6 CrNiCu 18 10 4 Kd
309 Z 15 CN 24-13 X 15 CrNiS 20 12 1.4828 X 16 CrNi 2314 SUH 309 309S24 X 15 CrNi 23 13
309 S X 6 CrNi 2314 SUS 309S 20KH23N18 X 6 CrNi 22 13
310 X 12 CrNi 25 21 1.4845 X 22 CrNi 2520 SUH 310 10KH23N18 310S24
310 S Z 12 CN 25-20 X 12 CrNi 25 20 1.4842 X 5 CrNi 2520 SUS 310S 20KH25N20S2 23 61 X 6 CrNi 25 20
314 Z 12 CNS 25-20 X 15 CrNiSi 25 20 1.4841 X 16 CrNiSi 2520 X 15 CrNiSi 25 20
316 Z 6 CND 17-11 X 5 CrNiMo 17 12 2 1.4401 X 5 CrNiMo 1712 SUS 316 X 6 CrNiMo 17-12-03 23 47 316S31 X 6 CrNiMo 17 12 2
316 Z 6 CND 17-12 X 5 CrNiMo 17 13 3 1.4436 X 5 CrNiMo 1713 SUS 316 X 6 CrNiMo 17-12-03 23 43 316S33 X 6 CrNiMo 17 13 3
316 F X 12 CrNiMoS 18 11 1.4427
316 N SUS 316N
316 H X 8 CrNiMo 1712 SUS F 316H X 5 CrNiMo 17-12
316 H X 8 CrNiMo 1713 03KH17N14M2 X 6 CrNiMo 17-12-03
316 L Z 2 CND 17-12 X 2 CrNiMo 17 13 2 1.4404 X 2 CrNiMo 1712 SUS 316L X 2 CrNiMo 17-12-03 23 48 316S11 X 3 CrNiMo 17 12 2
Z 2 CND 17-12-Az X 2 CrNiMoN 17 12 2 1.4406 X 2 CrNiMoN 1712 SUS 316LN 03KH16N15M3
316 L Z 2 CND 17-13 X 2 CrNiMo 18 14 3 1.4435 X 2 CrNiMo 1713 X 2 CrNiMo 17-12-03 23 53 316S13 X 3 CrNiMo 17 13 3
Z 2 CND 17-13-Az X 2 CrNiMoN 17 13 3 1.4429 X 2 CrNiMoN 1713 08KH17N13M2T 10KH17N13M2T 23 75
Z6 CNDT 17-12 X 6 CrNiMoTi 17 12 2 1.4571 X 6 CrNiMoTi 1712 08KH17N13M2T 10KH17N13M2T X 6 CrNiMoTi 17-12-03 23 50 320S31 X 6 CrNiMoTi 17 12 2
X 10 CrNiMoTi 18 12 1.4573 X 6 CrNiMoTi 1713 08KH16N13M2B X 6 CrNiMoTi 17-12-03 320S33 X 6 CrNiMoTI 17 13 3
Z 6 CNDNb 17-12 X 6 CrNiMoNb 17 12 2 1.4580 X 6 CrNiMoNb 1712 09KH16N15M3B X 6 CrNiMoNb 17 12 2
X 10 CrNiMoNb 18 12 1.4583 X 6 CrNiMoNb 1713 X 6 CrNiMoNb 17 13 3
317 X 5 CrNiMo 1815 SUS 317 23 66 317S16
317 L Z 2 CND 19-15 X 2 CrNiMo 18 16 4 1.4438 X 2 CrNiMo 1815 SUS 317L 23 67 317S12 X 3 CrNiMo 18 16 4
317 L Z 2 CND 19-15 X 2 CrNiMo 18 16 4 1.4438 X 2 CrNiMo 1816 SUS 317L 23 67 317S12 X 3 CrNiMo 18 16 4
330 Z 12NCS 35-16 X 12 NiCrSi 36 16 1.4864 SUH 330 08KH18N10T
321 Z 6 CNT 18-10 X 6 CrNiTi 18 10 X 12 CrNiTi 18 9 1.4541 1.4878 X 6 CrNiTi 1811 SUS 321 12KH18N10T X 6 CrNiTi 18-11 23 37 321S31 X 6 CrNiTi 18 10
321 H X 8 CrNiTi 1811 SUS 321H X 7 CrNiTi 18-11 321S20
329 X 8 CrNiMo 27 5 1.4460 SUS 329J1 08KH18N12B 23 24
347 Z 6 CNNb 18-10 X 6 CrNiNb 18 10 1.4550 X 6 CrNiNb 1811 SUS 347 X 6 CrNiNb 18-11 23 38 347S31 X 6 CrNiNb 18 10
347 H X 8 CrNiNb 1811 SUS F 347H X 7 CrNiNb 18-11
904L Z 12 CNDV 12-02 1.4939
X 20 CrNiSi 25 4 1.4821
UNS31803 X 2 CrNiMoN 22 5 1.4462
UNS32760 Z 3 CND 25-06Az X 3 CrNiMoN 25 7 1.4501 12Kh13
403 Z 12 C 13 X 6 Cr 13 X 10 Cr 13 X 15 Cr 13 1.4000 1.4006 1.4024 X 12 Cr 13 SUS 403 X 6 Cr 13 23 02 403S17 X 10 Cr 13 X 12 Cr 13
405 Z 6 CA 13 X 6 CrAl 13 1.4002 X 6 CrAl 13 SUS 405 X 6 CrAl 13 405S17 X 6 CrAl 13
Z 8 CA 7 X 10 CrAl 7 1.4713 10Kh13SYu X 10 CrAl 7
X 10 CrAl 13 1.4724 X 10 CrAl 12 15Kh18SYu
X 10 CrAl 18 1.4742 X 10 CrSiAl 18
409 Z 6 CT 12 X 6 CrTi 12 1.4512 X 6 CrTi 12 SUH 409 409S19 X 5 CrTi 12
X 2 CrTi 12 12Kh13
410 Z 10 C 13 Z 12 C 13 X 6 Cr 13 X 10 Cr 13 X 15 Cr 13 1.4000 1.4006 1.4024 X 12 Cr 13 SUS 410 08Kh13 X 12 Cr 13 23 02 410S21 X 12 Cr 13
410 S Z 6 C 13 X 6 Cr 13 1.4000 X 6 Cr 13 SUS 410S 23 01 403S17 X 6 Cr 13
414

Stainless Steel Concentric Flanged Reducer International Material Comparison

AISI USA Werkstoff Nr. DIN / DIN EN UNS Unified BS British SS Swedish AFNOR French
410 S 1.4000 X6 Cr 13 S 41008 403 S 17 2301 Z 8 C 12
405 1.4002 X6 CrAI 13 S 40500 405 S 17 Z 8 CA 12
1.4003 X2 CrNi 12
416 1.4005 X12 CrS 13 S 41600 416 S 21 2380 Z 11 CF 13
410 1.4006 X12 Cr 13 S 41000 410 S 21 2302 Z 10 C 13
430 1.4016 X6 Cr 17 S 43000 430 S 15 2320 Z 8 C 17
420 1.4021 X20 Cr 13 S 42000 420 S 37 2303 Z 20 C 13
-410 1.4024 X 15 Cr 13 (S 41000) 420 S 29
420 F 1.4028 X30 Cr 13 S 42020 420 S 45 2304 Z 30 C 13
1.4031 X39 Cr 13 420 S 45 2304 Z 33 C 13
1.4034 X46 Cr 13 (420 S 45) 2304 Z 40 C 14
431 1.4057 X17 CrNi 16-2 S 43100 431 S 29 2321 Z 15 CN 16,02
430 F 1.4104 X14 CrMoS 17 S 43020 (441 S 29) 2383 Z 13 CF 17
440 B 1.4112 X90 CrMoV 18 S 44003
434 1.4113 X6 CrMo 17-1 S 43400 434 S 17 Z 8 CD 17-01
1.4120 X20 CrMo 13 Z 20 CD 14
1.4122 X39 CrMo 17-1
304 1.4301 X5 CrNi 18-10 S 30400 304 S 15 2332 Z 6 CN 18,09
-305 1.4303 X4 CrNi 18-12 (S 30500) 305 S 19 Z 8 CN 18-12
303 1.4305 X8 CrNiS 18-9 S 30300 303 S 31 2346 Z 8 CNF 18,09
304 L 1.4306 X2 CrNi 19-11 S 30403 304 S 11 2352 Z 2 CN 18,09
304 L 1.4307 X2 CrNi 18-9 304 S 11 2352 Z 3 CN 18,10
301 1.4310 X10 CrNi 18-8 S 30100 301 S 22 2331 Z 12 CN 18,08
304 LN 1.4311 X2 CrNiN 18-10 S 30453 304 S 61 2371 Z 3 CN 18-10 AZ
CA 6 NM 1.4313 X3 CrNiMo 13-4 425 C 11 2384 Z 4 CND 13,04 M
304 N 1.4315 X5 CrNiN 19-9 S 30451 Z 6 CN 19-09 AZ
301 LN 1.4318 X2 CrNiN 18-7
302 1.4319  X 5 CrNi 18 7  302S25  23 31  Z 10 CN 18-09
316 1.4401 X5 CrNiMo 17-12-2 S 31600 316 S 31 2347 Z 7 CND 17,12,02
316 L 1.4404 X2 CrNiMo 17-12-2 S 31603 316 S 11 2348 Z 3 CND 18,12,02
 1.4406  X 2 CrNiMoN 17 12 2  Z 2 CND 17-12-Az
1.4418 X4 CrNiMo 16-5-1 2387 Z 6 CND 16,05,01
316 F 1.4427 X4 CrNiMoS 18-11 S 31620
316 LN 1.4429 X2 CrNiMoN 17-13-3 S 31653 316 S 63 2375 Z 3 CND 17-12 AZ
316 L 1.4432 X2 CrNiMo 17-12-3 316 S 13 2353 Z 3 CND 17,12,03
316 L 1.4435 X2 CrNiMo 18-14-3 S 31603 316 S 11 2353 Z 3 CND 18,14,03
316 1.4436 X3 CrNiMo 17-13-3 S 31600 316 S 31 2343 Z 7 CND 18,12,03
317 L 1.4438 X2 CrNiMo 18-15-4 S 31703 317 S 12 2367 Z 3 CND 19,15,04
(317 LMN) 1.4439 X2 CrNiMoN 17-13-5
317 1.4449 X5 CrNiMo 17-13 S 31700 317 S 16
329 1.4460 X3 CrNiMoN 27-5-2 S 32900 2324 Z 5 CND 27.05.AZ
1.4462 X2 CrNiMoN 22-5-3 S 31803 2377 (Z 5 CNDU 21,08)
1.4465 X1 CrNiMoN 25-25-2 Z 2 CND 25-22 AZ
UNS32760 1.4501 X 3 CrNiMoN 25 7 Z 3 CND 25-06Az
441 1.4509 X2 CrTiNb 18 Z 3 CTNb 18
439 1.4510 X3 CrTi17 S 43900 Z 4 CT 17
1.4511 X8 CrNb 17 Z 4 CNb 17
409 1.4512 X2 CrTi 12 S 40900 409 S 19 Z 3 CT 12
1.4520 X2 CrTi 17
444 1.4521 X2 CrMoTi 18-2 S 44400
1.4529 X1 NiCrMoCuN 25-20-7 (S 31254)
(904 L) 1.4539 X1 NiCrMoCu 25-20-5 N 08904 2562 Z 1 NCDU 25,20
321 1.4541 X6 CrNiTi 18-10 S 32100 321 S 31 2337 Z 6 CNT 18,10
630 1.4542 X5 CrNiCuNb 16-4 S 17400 Z 67CNU 15,05
1.4544
1.4546 X5 CrNiNb 18-10
347 1.4550 X6 CrNiNb 18-10 S 34700 347 S 31 2338 Z 6 CNNb 18,10
316 Ti 1.4561 X1 CrNiMoTi 18-13-2 S 31603
1.4563 X1 NiCrMoCu 31-27-4 N 08028 2584 Z 2 NCDU 31,27
S 34565 1.4565 X2 CrNiMnMoNbN 25-18 -5-4
631 1.4568 X7 CrNiAI 17-7 S 17700 2388 Z 9 CNA 17-07
316 Ti 1.4571 X6 CrNiMoTi 17-12-2 S 31635 320 S 31 2350 Z 6 CNDT 17,12
 1.4573  X 10 CrNiMoTi 18 12  320S33
 1.4580  X 6 CrNiMoNb 17 12 2  Z 6 CNDNb 17-12
 1.4583  X 10 CrNiMoNb 18 12
1.4589 X5 CrNiMoTi 15-2
1.4713 X10 CrAISi 7 Z 8 CA 7
1.4724 X 10 CrAl 13 (Z 10 C 13)
1.4742 X 10 CrAl 18 Z 10 CAS 18
(446) 1.4762 X 10 CrAl 24 (S 44600) (2322) Z 10 CAS 24
1.4821 X 20 CrNiSi 25 4 Z 20 CNS 25.04
309 1.4828 X 15 CrNiSi 20 12 (S 30900) 309 S 24 Z 15 CNS 20.12
314 1.4841 X 15 CrNiSi 25 20 S 31400 314 S 25 Z 12 CNS 25.20
310 S  1.4842  X 12 CrNi 25 20  23 61  Z 12 CN 25-20
310 S 1.4845 X 12 CrNi 25 21 S 31008 310 S 24 2361 Z 12 CN 25.20
330 1.4864 X 12 NiCrSi 36 16 N 08330 (3076 NA 17) Z 12 CNS 35.16
B 163 1.4876 X 10 NiCrAlTi 32 20 3076 NA 15 H Z 8 NC 32.21
321 1.4878 X 12 CrNiTi 18 9 S 32100 321 S 51 2337 Z 6 CNT 18.12
904L 1.4939  Z 12 CNDV 12-02 

Stainless Steel Flanged Concentric Reducer Application Industries

We produce full range of Stainless Steel 304 Flanged Concentric Reducer in every sizes, pressure / classes, dimensions to meet needs of customers. Our products are well accepted by the majority of customers. it’s widely used in aerospace, shipbuilding, metallurgy, automotive instrumentation, petrochemical, food machinery, biological engineering In the field of environmental protection.

  • Refineries
  • Food Processing & Dairy
  • Oil and Gas Industry
  • Off-Shore Oil Drilling Companies
  • Pharmaceutical Equipment
  • Pulp & Paper Industry
  • Power Generation
  • Specialty Chemicals
  • Sea Water Equipment
  • Gas Processing
  • Chemical Equipment
  • Heat Exchangers
  • Petrochemicals
  • Pharmaceuticals
  • Condensers
SS Flanged Concentric Reducer Application Industries

Stainless Steel Flanged Concentric Reducer Inspection

Stainless Steel Flanged Concentric Reducer Material Inspection

We at Creative Piping Solutions Pvt. Ltd. ensures that all our materials go through strict quality tests before dispatching them to our clients. We conduct all necessary test of SS 316 Flanged Concentric Reducer to assure the quality of deliver products to fit clients projects and needs. NDT test used for Stainless Steel 316L Flanged Concentric Reducer are Positive material identification (PMI), Penetrating liquids, Ferrite content, Hydrostatic test / hydro testing (pressure testing), Magnetic particles, Macrography, Micrography, Pneumatic pressure, Radiography. All of the listed test, the pressure testing is one of the most commonly specified, especially for mission critical fittings in the pipeline.

Stainless Steel Flanged Concentric Reducer Packing & Forwarding

There are different ways of packing a Stainless Steel 321 Flanged Concentric Reducer, but two principles that are vital for any method to work prevent rusting and Sea transportation security. Our all products packed with seaworthy packing method then delivery to customers, usually the packing way include wooden box, wooden pallet. We make sure that it is seaworthy, strong, waterproof and easy for loading and unloading. All shipping and product details also stick to outside of package. SS 310s Flanged Concentric Reducer pack with environmental poly bags, and then in free fumigation wooden cases or wooden plate. SS 317L Flanged Concentric Reducer are packed in wooden corrugated boxes foiled in bubble wraps and plastic wraps.

Stainless Steel 321 Flanged Concentric Reducer Packing & Forwarding

SS Flanged Concentric Reducer Export & Supply to below mentioned Countries

MIDDLE EAST: Saudi Arabia (KSA), United Arab Emirates (UAE), Iran, Iraq, Jordan, Qatar, Bahrain, Oman, Kuwait, Turkey, Yemen, Syria, Cyprus.
ASIA: Malaysia, India, Taiwan, Cambodia, Singapore, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Myanmar.
SOUTH AMERICA: Venezuela, Argentina, Bolivia, Colombia, Ecuador, Guyana, Paraguay, Uruguay, Brazil, Chile.
AFRICA: South Africa, Nigeria, Algeria, Angola, Libya, Egypt, Gabon, Sudan, Equatorial Guinea, The Republic Of Congo.
NORTH AMERICA: USA, Canada, Mexico, Panama, Costa Rica, Puerto Rico, Trinidad, And Tobago, Jamaica, Bahamas, Denmark.
EUROPE: UK, Netherlands, Russia, Norway, Germany, France, Italy, Spain, Ukraine, Belgium, Greece, Hungary, Albania, Austria, Finland, Ireland, Croatia, Slovenia, Malta, Switzerland, Slovakia, Czech Republic, Portugal.

SS Flanged Concentric Reducer Export & Supply to below mentioned Cities

Mumbai, Thane, Navi Mumbai, Pune, New Delhi, Secunderabad, Gimhae-si, Haryana, Colombo, Lahore, Thiruvananthapuram, Milan, Moscow, Dallas, Coimbatore, Jakarta, Istanbul, Bangkok, Kuwait City, Sharjah, Petaling Jaya, Ernakulam, Abu Dhabi, Tehran, Calgary, Noida, Riyadh, Vung Tau, Al Khobar, Atyrau, Lagos, Ulsan, Faridabad, Houston, Hanoi, Toronto, Hong Kong, Rajkot, Bengaluru, Chennai, Surat, New York, Caracas, Howrah, Sydney, Ahvaz, Karachi, Algiers, Pimpri-Chinchwad, Vadodara, Kolkata, Gurgaon, Ahmedabad, Chiyoda, Dubai, Seoul, Hyderabad, Singapore, Doha, Jeddah, Manama, Montreal, Brisbane, Los Angeles, Ankara, Ho Chi Minh City, Bhopal, Mexico City, Ludhiana, Aberdeen, Cairo, Geoje-si, Perth, Santiago, Chandigarh, Indore, Kuala Lumpur, Rio de Janeiro, Dammam, London, Muscat, Edmonton, Busan, Visakhapatnam, Bogota, Melbourne, Madrid, La Victoria, Granada, Courbevoie, Al Jubail, Port-of-Spain.