Buttweld Eccentric Reducer Manufacturer, ANSI/ASME B16.9 Eccentric Reducer Suppliers

ANSI/ASME B16.9 Buttweld Eccentric Reducer Suppliers

ASME/ANSI B16.9, ANSI B16.28, MSS-SP-43 Eccentric Reducer Suppliers, Check ASME B16.9 Welded Eccentric Reducer Dimensions & Buttweld Eccentric Reducer Price List, ASME B16.9 Eccentric Reducer Manufacturer in India.

ASME / ANSI B16.9 Seamless Buttweld Eccentric Reducer, High-Quality Buttweld Eccentric Reducer Exporters in India, Industrial Welded Eccentric Reducer, ANSI/ASME B16.9 Stainless Steel Eccentric Reducer also available in Duplex Steel, Alloy Steel, Hastelloy, Monel, Carbon Steel, Inconel, Titanium, Incoloy, Super Duplex, Alloy 20, 254 SMO, Copper Nickel, High & Low-Temperature Steel, Mild Steel Suppliers in South Africa, Malaysia, Singapore, UK, Philippines, Australia and UAE.

Creative Piping Solutions are Manufacturer, Supplier, and Exporter of Buttweld Eccentric Reducer and provide high-quality ANSI / ASME b16.9 Butt weld Eccentric Reducer offers you the simplest prices within the market. Buttweld Eccentric Reducers is out there in several specifications & measures to suit the wants of other applications. an equivalent Eccentric Reducer Schedule 40 is often utilized within the reverse as an eccentric Reducer.

The Eccentric Reducer method applies a function (Eccentric Reducer) against an accumulator and every value of the array (from left-to-right) to Buttweld Reduce it to one value. And what does a redux reducer do? The Butt Weld Eccentric Reducer is a pure function that takes the present state and an action and returns to a subsequent state. An Eccentric Pipe Reducer Fittings is manufactured with the smaller outlet off center to the larger finish that allows it to align with only one aspect of the water. The reducer should be put in with a straight aspect up so as that it’ll forestall the housing air at the pump suction. The Eccentric Reducers enable straightforward affiliation of varied sized pipes.

Eccentric Reducers are used at the suction aspect of pumps to form sure air doesn’t accumulate within the pipe. Horizontal gas reducers are continually eccentric, bottom flat, that allows condensed water or oil to empty at low points. Reducers in vertical lines are typically concentric unless the layout dictates otherwise. Associate eccentric reducer might be a fitting utilized in piping systems between Two pipes of varying diameters. They’re used wherever the diameter of the pipe on the upstream aspect of the fitting (i.e. wherever flow is returning from) is larger than the downstream aspect.

Buttweld Eccentric Reducer Manufacturers
Buttweld Eccentric Reducer Exporters
Buttweld Eccentric Reducer Stockists

ANSI B16.9 Buttweld Eccentric Reducer Specifications

  • Type Industrial Buttweld Eccentric Reducer
  • Size Seamless Reducer ( 1/2″~24″), ERW / Welded / Fabricated Reducer (1/2″~48″)
  • Standard ANSI B16.9, ANSI B16.28, MSS-SP-43
  • Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16, 25, 40
  • Thickness SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75.
  • DIN DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673
  • BS BS4504 , BS4504, BS1560, BS10
  • Specialize As per drawing
  • Coating / Surface Treatment Anti-rust Paint, Oil Black Paint, Yellow Transparent, Zinc Plated, Cold and Hot Dip Galvanized
  • Connection Type Buttwelding Fittings
  • Dimensions ANSI B16.9, ANSI B16.28, MSS-SP-43
  • Usage/Applications Oil Field, Offshore, Water System, Shipbuilding, Natural Gas, Electric Power, Pipe Projects.

Buttweld Eccentric Reducer Dimensions

Manufacturing Standards of Buttweld Eccentric Reducer

ASME Standard ASME/ANSI B16.9, ASME/ANSI B16.28, MSS-SP-43
DIN Standard DIN28011, DIN2617, DIN2616, DIN2615, DIN2605
EN Standard EN10253-2, EN10253-1
ASME B16.25 Buttwelding Ends
ASME B16.9 Factory-Made Wrought Fittings Buttwelding
ASME B16.28 Wrought Steel Eccentric Reducer
ASTM A403 – ASME SA403 Standard Specification for Wrought Austenitic Stainless Steel Piping Fitting
MSS SP-43 Wrought & Fabricated Butt-Welding Fitting for Low Pressure, Corrosion Resistant Applications

ASME / ANSI B16.9 Buttweld Eccentric Reducer Material & Grades

Stainless Steel Buttweld Eccentric Reducer :
ASTM A403 WP316/316L, ASTM A403 SA / A 774 WP-S, WP-W, WP-WX 304/304L, ASTM A182 F316L, 304L, DIN 1.4301, DIN1.4306, DIN 1.4401, DIN 1.4404

Duplex & Super Duplex Steel Eccentric Reducer :
ASTM A 815, ASME SA 815 UNS NO S31803, S32205. UNS S32750, S32950. Werkstoff No. 1.4462

Carbon Steel Buttweld Eccentric Reducer :
ASTM A234, ASME SA234 WPB , WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.

Low Temperature Carbon Steel Buttweld Eccentric Reducer : ASTM A420 WPL3, A420 WPL6

Alloy Steel Buttweld Eccentric Reducer :
ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91

Nickel Alloy Buttweld Eccentric Reducer :
ASTM B336, ASME SB336, Nickel 200 (UNS No. No2200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020), Titanium (Grade I & II), Cupro-Nickel 70/30, CuNi10Fe1Mn, CuNi30Mn1Fe.

ASME B16.9 Buttweld Eccentric Reducer Weight Chart in KG

NPS LBS KG
4-3 3.38 1.53
4-2.1/2 3.25 1.47
4-2 3 1.36
3.1/2-2.1/2 2.88 1.31
3.1/2-2 2.75 1.25
3.1/2-1.1/2 2.5 1.13
3.1/2-1.1/4 2.4 1.09
4-3.1/2 3.5 1.59
4-1.1/2 2.88 1.31
5-4 6 2.72
5-3.1/2 5.75 2.61
5-3 5.5 2.49
5-2.1/2 5.25 2.38
5-2 5 2.27
6-5 8.5 3.86
6-4 8.25 3.74
6-3.1/2 8.25 3.74
6-3 8 3.63
6-2.1/2 7.25 3.29
8-6 13.2 5.99
8-5 12 5.44
8-4 11 4.99
8-3.1/2 11 4.99
10-8 22 9.98
10-6 21.5 9.75
10-5 21 9.53
10-4 20 9.07
12-10 34 15.42
12-8 32 14.51
12-6 31 14.06
12-5 30 13.61
14-12 60 27.22
14-10 59.2 26.85
14-8 58.5 26.54
14-6 58 26.31
16-14 71 32.21
16-12 70 31.75
16-10 69.5 31.52
16-8 68.5 31.07
16-6
18-16 85 38.56
18-14 84 38.1
3/4-1/2 0.17 0.08
3/4-3/8 0.15 0.07
1-3/4 0.4 0.18
1-1/2 0.4 0.18
1.1/4-1 0.5 0.23
1.1/4-3/4 0.4 0.18
1.1/4-1/2 0.4 0.18
1.1/2-1.1/4 0.7 0.32
1.1/2-1 0.62 0.28
1.1/2-3/4 0.54 0.24
1.1/2-1/2 0.5 0.23
2-1.1/2 0.9 0.41
2-1.1/4 0.84 0.38
2-1 0.76 0.34
2-3/4 0.7 0.32
2.1/2-2 1.5 0.68
2.1/2-1.1/2 1.38 0.63
2.1/2-1.1/4 1.25 0.57
2.1/2-1 1.25 0.57
3-2.1/2 2 0.91
3-2 1.8 0.82
3-1.1/2 1.7 0.77
3-1.1/4 1.6 0.73
3.1/2-3 3.15 1.43
18-12 83 37.65
18-10 82 37.19
18-8
20-18 125 56.7
20-16 124 56.25
20-14 122 55.34
20-12 120 54.43
20-10
20-8
22-20 142 64.41
22-18 138 62.6
22-16 131 59.42
22-14 123 55.79
22-12
22-10
24-22
24-20 150 68.04
24-18 148 67.13
24-16 145 65.77
24-14
30-26 232 105.23
30-24 224 101.6
30-22 220 99.79
30-20 220 99.79
24-12
24-10
26-24 207 93.89
26-22 200 90.72
26-20 190 86.18
26-18 182 82.55
26-16
26-14
26-12
28-26 224 101.6
28-24 216 97.98
28-22 210 95.25
28-20 199 90.26
30-28 241 109.32

ASME B16.9 Buttweld Eccentric Reducer Manufacturing Process

The most appropriate Manufacturing Process for every product are going to be decided considerately of its material, sizes, shape, use, standards, and special properties. There are various Pipe Fittings Manufacturing Processes that want to manufacture Stainless Steel Eccentric Reducer and other pipe Fittings.

One of the foremost common Pipe Fittings Manufacturing Process of Carbon Steel Buttweld Eccentric Reducer from the pipe is a mandrel method which is quite hot forming methods. During this method, The pipe is cut into pieces and push with the assistance of a hydraulic pump. The heating coil heats the pipe and, it’s pushed over a die called, “mandrel” which allows the pipe to expand and bend simultaneously. This method is often wont to manufacture a good range of the diameter of Alloy Steel Eccentric Reducer.

Buttweld Eccentric Reducer are manufactured from Seamless Pipe and from Welded Pipe with filler materials. Large diameter fittings are manufactured from Plate. We’ve only covered the renowned Pipe Fittings Manufacturing Process here. There are many other methods that used to support the necessities.

Buttweld Eccentric Reducer Manufacturing Process

Dimensional Tolerances of Buttweld Eccentric Reducer as per ASME B16.9

Nominal Pipe Size 1/2 to 2½ 3 to 3½ 4 5 to 8
Outside Diameter
at Bevel (D)
+ 1.6
– 0.8
1.6 1.6 + 2.4
– 1.6
Inside Diameter at End 0.8 1.6 1.6 1.6
Center to End LR (A/B) 2 2 2 2
Center to End 3D (A/B) 3 3 3 3
Nominal Pipe Size 10 to 18 20 to 24 26 to 30 32 to 48
Outside Diameter
at Bevel (D)
+ 4
– 3.2
+ 6.4
– 4.8
+ 6.4
– 4.8
+ 6.4
– 4.8
Inside Diameter at End 3.2 4.8 + 6.4
– 4.8
+ 6.4
– 4.8
Center to End LR (A/B) 2 2 3 5
Center to End 3D (A/B) 3 3 6 6
Wall Thickness (t) Not less than 87.5% of Nominal Wall Thickness

Available Types of ASME B16.9 Buttweld Eccentric Reducer

ANSI B16.9 Buttweld Eccentric Reducer ASME B16.28 Buttweld Eccentric Pipe Reducer
Welded Butt weld Eccentric Reducer Seamless Butt weld Eccentric Reducer
Buttweld Eccentric Reducer Butt Weld Pipe Reducers
ASME B16.9 Butt weld Eccentric Reducer Steel Eccentric Reducer Pipe Fittings
Stainless Steel Eccentric Reducer SS Eccentric Reducers
Carbon Steel Eccentric Reducer High Quality Eccentric Reducer
ASTM A403 Stainless Steel Eccentric Reducers Duplex Steel Buttweld Eccentric Reducer
Super Duplex Steel Buttweld Eccentric Reducer Copper Nickel Eccentric Reducer
High Nickel Alloy Eccentric Reducer Hastelloy Eccentric Reducer
Titanium Buttweld Eccentric Reducer Inconel Butt weld Eccentric Reducer

Butt weld Eccentric Reducer Application Industries

  • Refineries
  • Food Processing & Dairy
  • Oil and Gas Industry
  • Off-Shore Oil Drilling Companies
  • Pharmaceutical Equipment
  • Pulp & Paper Industry
  • Power Generation
  • Specialty Chemicals
  • Sea Water Equipment
  • Gas Processing
  • Chemical Equipment
  • Heat Exchangers
  • Petrochemicals
  • Pharmaceuticals
  • Condensers
Buttweld Eccentric Reducer Application Industries

ASME B16.9 Eccentric Reducer Inspection

ASME B16.9 Eccentric Reducer Material Inspection

All Buttweld Eccentric Reducer are inspected and tested in accordance with the relevant product standard (eg. ASME/ANSI B16.9, ANSI B16.28, MSS-SP-43) or code and as stated in the Purchase requisition. Pressure testing or Hydro-testing of Stainless Steel Eccentric Reducer where required by the standard shall be performed using water having less than 30ppm of chlorides. All welds in welded buttweld pipe fittings shall be 100% radiographed in accordance with the individual ASTM Standard. In lieu of radiography, Ultrasonic examination is not allowed. Examinations and/or tests may be reviewed and / or witnessed by the contractor or their authorized third party inspector at our facility. We are responsible for informing the contractor about the availability of goods for inspection and testing. Inspection is performed as per “Vendor Quality Requirement form” attached with the Inquiry / Purchase requisition. As a manufacturer, we submit the certificate of conformity of the material duly certified by inspector.

Buttweld Eccentric Reducer Packing & Forwarding

Seamless Eccentric Reducer are packed ready for export in a manner which allows easy handling and prevents damage. We submit our standard packing procedure to purchaser for approval. Open ends of Buttweld Eccentric Reducer Pipe Fittings are supplied with heavy duty plastic protective plugs or caps. For bevelled ends, We insure that caps can protect the full area of the bevel. All material up to 6” in sizes shall be supplied in wooden boxes or cartons and as appropriate and adequately strapped. Buttweld Eccentric Reducer Fittings over 6” shall be supplied on wooden pallets with metal straps. Also, the pallets shall be shrink wrapped. All shipping documentation is provided for seamless delivery from mill to purchaser.

Buttweld Eccentric Reducer Packing & Forwarding

ANSI/ASME B16.9 Buttweld Eccentric Reducer Export & Supply to below mentioned Countries

MIDDLE EAST: Saudi Arabia (KSA), United Arab Emirates (UAE), Iran, Iraq, Jordan, Qatar, Bahrain, Oman, Kuwait, Turkey, Yemen, Syria, Cyprus.
ASIA: Malaysia, India, Taiwan, Cambodia, Singapore, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Myanmar.
SOUTH AMERICA: Venezuela, Argentina, Bolivia, Colombia, Ecuador, Guyana, Paraguay, Uruguay, Brazil, Chile.
AFRICA: South Africa, Nigeria, Algeria, Angola, Libya, Egypt, Gabon, Sudan, Equatorial Guinea, The Republic Of Congo.
NORTH AMERICA: USA, Canada, Mexico, Panama, Costa Rica, Puerto Rico, Trinidad, and Tobago, Jamaica, Bahamas, Denmark.
EUROPE: UK, Netherlands, Russia, Norway, Germany, France, Italy, Spain, Ukraine, Belgium, Greece, Hungary, Albania, Austria, Finland, Ireland, Croatia, Slovenia, Malta, Switzerland, Slovakia, Czech Republic, Portugal.

ANSI/ASME B16.9 Buttweld Eccentric Reducer Export & Supply to below Mentioned Cities

Mumbai, Thane, Navi Mumbai, Pune, New Delhi, Secunderabad, Gimhae-si, Haryana, Colombo, Lahore, Thiruvananthapuram, Milan, Moscow, Dallas, Coimbatore, Jakarta, Istanbul, Bangkok, Kuwait City, Sharjah, Petaling Jaya, Ernakulam, Abu Dhabi, Tehran, Calgary, Noida, Riyadh, Vung Tau, Al Khobar, Atyrau, Lagos, Ulsan, Faridabad, Houston, Hanoi, Toronto, Hong Kong, Rajkot, Bengaluru, Chennai, Surat, New York, Caracas, Howrah, Sydney, Ahvaz, Karachi, Algiers, Pimpri-Chinchwad, Vadodara, Kolkata, Gurgaon, Ahmedabad, Chiyoda, Dubai, Seoul, Hyderabad, Singapore, Doha, Jeddah, Manama, Montreal, Brisbane, Los Angeles, Ankara, Ho Chi Minh City, Bhopal, Mexico City, Ludhiana, Aberdeen, Cairo, Geoje-si, Perth, Santiago, Chandigarh, Indore, Kuala Lumpur, Rio de Janeiro, Dammam, London, Muscat, Edmonton, Busan, Visakhapatnam, Bogota, Melbourne, Madrid, La Victoria, Granada, Courbevoie, Al Jubail, Port-of-Spain.