Buttweld Piggable Bend Manufacturer, ANSI/ASME B16.9 Piggable Bend Suppliers
ASME/ANSI B16.9, ANSI B16.28, MSS-SP-43 Piggable Bend Suppliers, Check ASME B16.9 Welded Piggable Bend Dimensions & Buttweld Piggable Bend Price List, ANSI B16.9 Buttweld Piggable Bends, ASME B16.9 Piggable Pipe Bends, 90 Degree Piggable Bend Manufacturer in India.
ASME / ANSI B16.9 Seamless Piggable Bend, High-Quality Buttweld Piggable Bend Exporters in India, Industrial Welded Piggable Bend, ANSI/ASME B16.9 Stainless Steel Buttweld Piggable Bend also available in Duplex Steel, Alloy Steel, Hastelloy, Monel, Carbon Steel, Inconel, Titanium, Incoloy, Super Duplex, Alloy 20, 254 SMO, Copper Nickel, High & Low-Temperature Steel, Mild Steel Suppliers in South Africa, Malaysia, Singapore, UK, Philippines, Australia and UAE.
We are Manufacturers, Suppliers, and Exporters of Buttweld Piggable Bends that are fundamental to join pipes of various diameters. Our stainless steel Piggable Bends have excellent mechanical properties at both cryogenic and elevated temperatures, whereas our ASME B16.9 Piggable Pipe Bends are immune to a variety of corrosives, including and sulphuric acids, thus they connect pipe conveying caustic fluid. ANSI B16.9 Piggable Bends are often bent into various angles to fit a pipe. we provide Piggable Bends in various thicknesses, in seamless, welded, and fabricated types and schedules and ranges that go with ANSI standards.
Piggable Bend Pipe Fittings gets its name for the power to run a “pig” or “smart pig” through a pipeline. this is often finished a range of various reasons from pipeline inspection to cleaning. Smart pigs have many various uses and became an important component in pipeline maintenance and operation. Piggable Bends for fittings means holding an inside diameter (ID) tolerance as on the point of nominal as possible. We as Manufacturers of the pipeline components would like our customers to provide us with the minimum ID tolerance when ordering as piggable. Pigging is usually impeded by pipeline design characteristics – including tight, mitered, or forged bends, certain sorts of welds and connections, and dual- and multi-diameter pipe sections.
ANSI B16.9 Buttweld Piggable Bend Specifications
- Type Industrial Buttweld Piggable Bend
- Size 2″NB TO 18″ NB (Seamless & 100% X-Ray Welded, Fabricated)
- Bend Radii 75 / 100 / 150 / 250 / 300 / 500 / 800 / 1,000 / 1,200 / 1,500 mm.
- Standard ANSI B16.9, ANSI B16.28, MSS-SP-43
- Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16, 25, 40
- Thickness SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75.
- DIN DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673
- BS BS4504 , BS4504, BS1560, BS10
- Specialize As per drawing
- Coating / Surface Treatment Anti-rust Paint, Oil Black Paint, Yellow Transparent, Zinc Plated, Cold and Hot Dip Galvanized
- Connection Type Buttwelding Fittings
- Dimensions ANSI B16.9, ANSI B16.28, MSS-SP-43
- Usage/Applications Oil Field, Offshore, Water System, Shipbuilding, Natural Gas, Electric Power, Pipe Projects etc.
Buttweld Piggable Bend Dimensions
Manufacturing Standards of Buttweld Piggable Bends
|ASME Standard||ASME/ANSI B16.9, ASME/ANSI B16.28, MSS-SP-43|
|DIN Standard||DIN28011, DIN2617, DIN2616, DIN2615, DIN2605|
|EN Standard||EN10253-2, EN10253-1|
|ASME B16.25||Buttwelding Ends|
|ASME B16.9||Factory-Made Wrought Fittings Buttwelding|
|ASME B16.28||Wrought Steel Piggable Bends|
|ASTM A403 – ASME SA403||Standard Specification for Wrought Austenitic Stainless Steel Piping Fitting|
|MSS SP-43||Wrought & Fabricated Butt-Welding Fitting for Low Pressure, Corrosion Resistant Applications|
ASME / ANSI B16.9 Buttweld Piggable Bends Material & Grades
Stainless Steel Buttweld Piggable Bend :
ASTM A403 WP316/316L, ASTM A403 SA / A 774 WP-S, WP-W, WP-WX 304/304L, ASTM A182 F316L, 304L, DIN 1.4301, DIN1.4306, DIN 1.4401, DIN 1.4404
Duplex & Super Duplex Steel Buttweld Piggable Bend :
ASTM A 815, ASME SA 815 UNS NO S31803, S32205. UNS S32750, S32950. Werkstoff No. 1.4462
Carbon Steel Buttweld Piggable Bend :
ASTM A234, ASME SA234 WPB , WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
Low Temperature Carbon Steel Piggable Bend : ASTM A420 WPL3, A420 WPL6
Alloy Steel Buttweld Piggable Bend :
ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
Nickel Alloy Buttweld Piggable Bend :
ASTM B336, ASME SB336, Nickel 200 (UNS No. No2200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020), Titanium (Grade I & II), Cupro-Nickel 70/30, CuNi10Fe1Mn, CuNi30Mn1Fe.
ASME B16.9 Buttweld Piggable Bend Manufacturing Process
The most appropriate Manufacturing Process for every product are going to be decided considerately of its material, sizes, shape, use, standards, and special properties. There are various Pipe Fittings Manufacturing Processes that wont to Manufacture Piggable Bend, and other pipe Fittings.
One of the foremost common Pipe Fittings Manufacturing Process of Buttweld Piggable Bend Pipe Fittings from the pipe is a mandrel method which is quite hot forming methods. During this method, The pipe is cut into pieces and push with the assistance of a hydraulic pump. The heating coil heats the pipe and, it’s pushed over a die called, “mandrel” which allows the pipe to expand and bend simultaneously. This method is often wont to manufacture a good range of the diameter of Piggable Bend.
Buttweld Piggable Bend are manufactured from Seamless Pipe and from Welded Pipe with filler materials. Large diameter fittings are manufactured from Plate. We’ve only covered the renowned Pipe Fittings Manufacturing Process here. There are many other methods that used to support the necessities.
Dimensional Tolerances of Buttweld Piggable Bend as per ASME B16.9
|Nominal Pipe Size||1/2 to 2½||3 to 3½||4||5 to 8|
at Bevel (D)
|Inside Diameter at End||0.8||1.6||1.6||1.6|
|Center to End LR (A/B)||2||2||2||2|
|Center to End 3D (A/B)||3||3||3||3|
|Nominal Pipe Size||10 to 18||20 to 24||26 to 30||32 to 48|
at Bevel (D)
|Inside Diameter at End||3.2||4.8||+ 6.4
|Center to End LR (A/B)||2||2||3||5|
|Center to End 3D (A/B)||3||3||6||6|
|Wall Thickness (t)||Not less than 87.5% of Nominal Wall Thickness|
Available Types of ASME B16.9 Buttweld Piggable Bend
|Carbon Steel Piggable Bends||High Quality Piggable Bend|
|A403 Stainless Steel Piggable Bend||Duplex Steel Piggable Bends|
|Super Duplex Steel Piggable Bend||Copper Nickel Piggable Bends|
|High Nickel Alloy Piggable Bend||Hastelloy Piggable Bend|
|Buttweld Piggable Bend||Butt Weld Piggable Pipe Bends|
|ASME B16.9 Piggable Bend||90 Degree Piggable Bend|
|Stainless Steel Piggable Bend||SS Piggable Bends|
|ANSI B16.9 Piggable Pipe Bend||ASME B16.28 Buttweld Piggable Bend|
|Welded Piggable Bend||Seamless Piggable Bend|
|Titanium Piggable Bend||Inconel Butt weld Piggable Bend|
Butt weld Piggable Bend Application Industries
- Food Processing & Dairy
- Oil and Gas Industry
- Off-Shore Oil Drilling Companies
- Pharmaceutical Equipment
- Pulp & Paper Industry
- Power Generation
- Specialty Chemicals
- Sea Water Equipment
- Gas Processing
- Chemical Equipment
- Heat Exchangers
ANSI B16.9 Piggable Bend Inspection
All Buttweld Piggable Bend are inspected and tested in accordance with the relevant product standard (eg. ASME/ANSI B16.9, ANSI B16.28, MSS-SP-43) or code and as stated in the Purchase requisition. Pressure testing or Hydro-testing of Stainless Steel Piggable Bend where required by the standard shall be performed using water having less than 30ppm of chlorides. All welds in welded buttweld pipe fittings shall be 100% radiographed in accordance with the individual ASTM Standard. In lieu of radiography, Ultrasonic examination is not allowed. Examinations and/or tests may be reviewed and / or witnessed by the contractor or their authorized third party inspector at our facility. We are responsible for informing the contractor about the availability of goods for inspection and testing. Inspection is performed as per “Vendor Quality Requirement form” attached with the Inquiry / Purchase requisition. As a manufacturer, we submit the certificate of conformity of the material duly certified by inspector.
Buttweld Piggable Bend Packing & Forwarding
Seamless Piggable Bend are packed ready for export in a manner which allows easy handling and prevents damage. We submit our standard packing procedure to purchaser for approval. Open ends of Buttweld Piggable Bend are supplied with heavy duty plastic protective plugs or caps. For bevelled ends, we insure that caps can protect the full area of the bevel. All material up to 6” in sizes shall be supplied in wooden boxes or cartons and as appropriate and adequately strapped. Buttweld Piggable Bend Fittings over 6” shall be supplied on wooden pallets with metal straps. Also, the pallets shall be shrink wrapped. All shipping documentation is provided for seamless delivery from mill to purchaser.
ANSI B16.9 Piggable Bend Export & Supply to below mentioned Countries
ASIA: Malaysia, India, Taiwan, Cambodia, Singapore, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Myanmar.
SOUTH AMERICA: Venezuela, Argentina, Bolivia, Colombia, Ecuador, Guyana, Paraguay, Uruguay, Brazil, Chile.
AFRICA: South Africa, Nigeria, Algeria, Angola, Libya, Egypt, Gabon, Sudan, Equatorial Guinea, The Republic Of Congo.
NORTH AMERICA: USA, Canada, Mexico, Panama, Costa Rica, Puerto Rico, Trinidad, and Tobago, Jamaica, Bahamas, Denmark.
EUROPE: UK, Netherlands, Russia, Norway, Germany, France, Italy, Spain, Ukraine, Belgium, Greece, Hungary, Albania, Austria, Finland, Ireland, Croatia, Slovenia, Malta, Switzerland, Slovakia, Czech Republic, Portugal.