Buttweld J Pipe Bend Manufacturer, ANSI/ASME B16.9 J Bend Suppliers
ASME/ANSI B16.9, ANSI B16.28, MSS-SP-43 J Pipe Bend Suppliers, Check ASME B16.9 Welded J Pipe Bend Dimensions & Buttweld J Pipe Bend Price List, Buttweld J Pipe Bend, ANSI B16.9 Buttweld J Pipe Bends, ASME B16.9 J Pipe Bends Manufacturer in India.
ASME / ANSI B16.9 Seamless Buttweld J Pipe Bend, High-Quality Buttweld J Pipe Bend Exporters in India, Industrial Welded J Pipe Bend, ANSI/ASME B16.9 Stainless Steel Buttweld J Pipe Bend also available in Duplex Steel, Alloy Steel, Hastelloy, Monel, Carbon Steel, Inconel, Titanium, Incoloy, Super Duplex, Alloy 20, 254 SMO, Copper Nickel, High & Low-Temperature Steel, Mild Steel Suppliers in South Africa, Malaysia, Singapore, UK, Philippines, Australia and UAE.
We are Manufacturers, Suppliers, and Exporters of Buttweld J Pipe Bends, an offset that’s fabricated to a J-shaped bend that enables within the drain of water from piping systems. stainless steel J-Bends are fixed below bathtubs and kitchen sinks that allow the incoming and drainage of water and other liquids. stainless-steel J-Bends have a crack-free, smooth surface and are durable too. we offer ANSI B16.9 Buttweld J Pipe Bends during a sort of hard to search out metals with corrosion-free threads.
The J-bend, generally mentioned as a P-bend, is known as a trap and is there to prevent unhealthy smells from drains returning up the pipe and making unpleasant odors in your home. The common P trap has each removable cracked. an alternate less common J trap contains a captive nut. There are many sorts of traps in plumbing however mostly just replace the space with 1-1/2″ and also the sink with 1-1/4″ (0.1 m) often found as a mixture sized trap with further insert adapter within the bag for the smaller sink size.
ANSI B16.9 Buttweld J Pipe Bend Specifications
- Type Industrial Buttweld J Pipe Bend
- Size 2″NB TO 18″ NB. (Seamless & 100% X-Ray Welded, Fabricated)
- Standard ANSI B16.9, ANSI B16.28, MSS-SP-43
- Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16, 25, 40
- Thickness SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75.
- DIN DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673
- BS BS4504 , BS4504, BS1560, BS10
- Specialize As per drawing
- Coating / Surface Treatment Anti-rust Paint, Oil Black Paint, Yellow Transparent, Zinc Plated, Cold and Hot Dip Galvanized
- Connection Type Buttwelding Fittings
- Dimensions ANSI B16.9, ANSI B16.28, MSS-SP-43
- Usage/Applications Oil Field, Offshore, Water System, Shipbuilding, Natural Gas, Electric Power, Pipe Projects.
Buttweld J Pipe Bend Dimensions
Manufacturing Standards of Buttweld J Pipe Bend
| ASME Standard | ASME/ANSI B16.9, ASME/ANSI B16.28, MSS-SP-43 |
|---|---|
| DIN Standard | DIN28011, DIN2617, DIN2616, DIN2615, DIN2605 |
| EN Standard | EN10253-2, EN10253-1 |
| ASME B16.25 | Buttwelding Ends |
| ASME B16.9 | Factory-Made Wrought Fittings Buttwelding |
| ASME B16.28 | Wrought Steel J Pipe Bend |
| ASTM A403 – ASME SA403 | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings |
| MSS SP-43 | Wrought & Fabricated Butt-Welding Fitting for Low Pressure, Corrosion Resistant Applications |
ASME / ANSI B16.9 Buttweld J Pipe Bend Material & Grades
Stainless Steel Buttweld J Pipe Bend :
ASTM A403 WP316/316L, ASTM A403 SA / A 774 WP-S, WP-W, WP-WX 304/304L, ASTM A182 F316L, 304L, DIN 1.4301, DIN1.4306, DIN 1.4401, DIN 1.4404
Duplex & Super Duplex Steel Buttweld J Pipe Bend :
ASTM A 815, ASME SA 815 UNS NO S31803, S32205. UNS S32750, S32950. Werkstoff No. 1.4462
Carbon Steel Buttweld J Pipe Bend :
ASTM A234, ASME SA234 WPB , WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
Low Temperature Carbon Steel Buttweld J Pipe Bend : ASTM A420 WPL3, A420 WPL6
Alloy Steel Buttweld J Pipe Bend :
ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
Nickel Alloy Buttweld J Pipe Bend :
ASTM B336, ASME SB336, Nickel 200 (UNS No. No2200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020), Titanium (Grade I & II), Cupro-Nickel 70/30, CuNi10Fe1Mn, CuNi30Mn1Fe.
ASME B16.9 Buttweld J Pipe Bend Manufacturing Process
The most appropriate Manufacturing Process for every product are going to be decided considerately of its material, sizes, shape, use, standards, and special properties. There are various Pipe Fittings Manufacturing Processes that want to manufacture J Pipe Bend, and other pipe Fittings.
One of the foremost common Pipe Fittings Manufacturing Process of Buttweld J Bend Pipe Fittings from the pipe is a mandrel method which is quite hot forming methods. During this method, The pipe is cut into pieces and push with the assistance of a hydraulic pump. The heating coil heats the pipe and, it’s pushed over a die called, “mandrel” which allows the pipe to expand and bend simultaneously. This method is often wont to manufacture a good range of the diameter of J Pipe Bend.
Buttweld J Pipe Bend are manufactured from Seamless Pipe and from Welded Pipe with filler materials. Large diameter fittings are manufactured from Plate. We’ve only covered the renowned Pipe Fittings Manufacturing Process here. There are many other methods that used to support the necessities.
Dimensional Tolerances of Buttweld J Pipe Bend as per ASME B16.9
| Nominal Pipe Size | 1/2 to 2½ | 3 to 3½ | 4 | 5 to 8 |
| Outside Diameter at Bevel (D) |
+ 1.6 – 0.8 |
1.6 | 1.6 | + 2.4 – 1.6 |
| Inside Diameter at End | 0.8 | 1.6 | 1.6 | 1.6 |
| Center to End LR (A/B) | 2 | 2 | 2 | 2 |
| Center to End 3D (A/B) | 3 | 3 | 3 | 3 |
| Nominal Pipe Size | 10 to 18 | 20 to 24 | 26 to 30 | 32 to 48 |
| Outside Diameter at Bevel (D) |
+ 4 – 3.2 |
+ 6.4 – 4.8 |
+ 6.4 – 4.8 |
+ 6.4 – 4.8 |
| Inside Diameter at End | 3.2 | 4.8 | + 6.4 – 4.8 |
+ 6.4 – 4.8 |
| Center to End LR (A/B) | 2 | 2 | 3 | 5 |
| Center to End 3D (A/B) | 3 | 3 | 6 | 6 |
| Wall Thickness (t) | Not less than 87.5% of Nominal Wall Thickness | |||
Available Types of ASME B16.9 Buttweld J Pipe Bend
| ANSI B16.9 J Pipe Bend | ASME B16.28 Buttweld J Pipe Bend |
| Weled J Pipe Bend | J Pipe Bend |
| Carbon Steel J Pipe Bends | High Quality J Pipe Bend |
| A403 Stainless Steel J Pipe Bends | Duplex Steel J Pipe Bends |
| Buttweld J Pipe Bend | Butt Weld J Pipe Bends |
| ASME B16.9 J Pipe Bend | 90 Degree J Pipe Bend |
| Stainless Steel J Pipe Bend | SS J Pipe Bends |
| Super Duplex Steel J Pipe Bend | Copper Nickel U Pipe Bends |
| High Nickel Alloy J Pipe Bend | Hastelloy J Pipe Bend |
| Titanium J Pipe Bend | Inconel Butt weld J Pipe Bend |
Butt weld J Pipe Bend Application Industries
- Refineries
- Food Processing & Dairy
- Oil and Gas Industry
- Off-Shore Oil Drilling Companies
- Pharmaceutical Equipment
- Pulp & Paper Industry
- Power Generation
- Specialty Chemicals
- Sea Water Equipment
- Gas Processing
- Chemical Equipment
- Heat Exchangers
- Petrochemicals
- Pharmaceuticals
- Condensers
J Pipe Bend Inspection
All Buttweld J Pipe Bend are inspected and tested in accordance with the relevant product standard (eg. ASME/ANSI B16.9, ANSI B16.28, MSS-SP-43) or code and as stated in the Purchase requisition. Pressure testing or Hydro-testing of Stainless Steel J Pipe Bend where required by the standard shall be performed using water having less than 30ppm of chlorides. All welds in welded buttweld pipe fittings shall be 100% radiographed in accordance with the individual ASTM Standard. In lieu of radiography, Ultrasonic examination is not allowed. Examinations and/or tests may be reviewed and / or witnessed by the contractor or their authorized third party inspector at our facility. We are responsible for informing the contractor about the availability of goods for inspection and testing. Inspection is performed as per “Vendor Quality Requirement form” attached with the Inquiry / Purchase requisition. As a manufacturer, we submit the certificate of conformity of the material duly certified by inspector.
Buttweld J Pipe Bend Packing & Forwarding
Seamless J Pipe Bend are packed ready for export in a manner which allows easy handling and prevents damage. We submit our standard packing procedure to purchaser for approval. Open ends of Buttweld J Pipe Bend are supplied with heavy duty plastic protective plugs or caps. For bevelled ends, we insure that caps can protect the full area of the bevel. All material up to 6” in sizes shall be supplied in wooden boxes or cartons and as appropriate and adequately strapped. Buttweld J Pipe Bend Fittings over 6” shall be supplied on wooden pallets with metal straps. Also, the pallets shall be shrink wrapped. All shipping documentation is provided for seamless delivery from mill to purchaser.
ASME B16.9 J Pipe Bend Export & Supply to below mentioned Countries
ASIA: Malaysia, India, Taiwan, Cambodia, Singapore, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Myanmar.
SOUTH AMERICA: Venezuela, Argentina, Bolivia, Colombia, Ecuador, Guyana, Paraguay, Uruguay, Brazil, Chile.
AFRICA: South Africa, Nigeria, Algeria, Angola, Libya, Egypt, Gabon, Sudan, Equatorial Guinea, The Republic Of Congo.
NORTH AMERICA: USA, Canada, Mexico, Panama, Costa Rica, Puerto Rico, Trinidad, and Tobago, Jamaica, Bahamas, Denmark.
EUROPE: UK, Netherlands, Russia, Norway, Germany, France, Italy, Spain, Ukraine, Belgium, Greece, Hungary, Albania, Austria, Finland, Ireland, Croatia, Slovenia, Malta, Switzerland, Slovakia, Czech Republic, Portugal.