Monel 400 Buttweld Pipe Fittings Manufacturer, ASTM B366 Alloy 400 Pipe Fittings
ISO Certified Suppliers and Exporters of ASTM B366 Monel 400 Buttweld Fittings, UNS N04400 Butt weld Pipe Fittings, WNR 2.4360 Seamless Pipe Fittings, ASME SB366 Monel 400 Welded Butt weld Fittings, Werkstoff no 2.4360 Pipe Fittings, ANSI B16.9 Monel 400 SR Elbow, Nickel Alloy 400 Pipe Fittings, UNS N04400 Pipe Elbow in India.
- Monel 400 Pipe Fittings Specifications
- ASTM B366 Monel 400 Buttweld Fittings Dimensions
- Monel 400 Buttweld Pipe Fittings Types
- ANSI B16.9 Monel 400 Pipe Fittings Forms & Availability
- ASTM B366 Monel 400 Buttweld Fittings Standard
- Manufacturing Standards of Monel 400 Fittings
- Equivalent Grades of ASTM B366 Monel 400 Pipe Fittings
- Chemical Composition of Alloy 400 Buttweld Fittings
- Mechanical Properties of Monel 400 Pipe Fittings
- Manufacturing Process of Monel 400 Pipe Fittings
- Ready Stock of Monel 400 Butt weld Pipe Fittings
- ASTM B366 Alloy 400 Pipe Fitting Classes for Grades
- UNS N04400 Pipe Fittings Application Industries
- Monel 400 Buttweld Fittings Inspection
- Monel 400 Pipe Fittings Packing & Forwarding
Largest Stockists of Monel 400 Equal Tee, Werkstoff No 2.4360 Buttweld Elbow, ASTM B366 400 Buttweld Fittings, Monel WNR 2.4360 Buttweld Cross, ANSI B16.9 Monel Alloy 400 Buttweld Pipe Bend, JIS NW 4400 Dish Cap, DIN 2.4360 Butt weld Reducer, GOST МНЖМц 28-2,5-1,5 Two Joint Pipe Fittings, AFNOR NU-30M Collar Pipe Fittings, EN NiCu30Fe Buttweld Pipe Cap, BS NA 13 Long Stub End, ASME SB366 Monel Alloy 400 Fittings.
Creative Piping Solutions is a well-known manufacturer of Monel Alloy 400 Pipe Fittings, which has excellent mechanical properties at subzero temperatures. The nickel and copper contents of the ore in Monel 400 Butt Weld Fittings were within the approximate ratio which is now formally specified for the alloy. Monel 400 Elbow is high thermal conductivity and purity of the fabric which makes weld penetration less than in austenitic stainless steels.
Monel 400 Tee is usually utilized in Chemical & hydrocarbon processing equipment, Gasoline & freshwater tanks, and others. Monel 400 Reducer is additionally utilized in Propeller and pump shafts, alongside Cladding for the upper areas of petroleum refinery crude columns. Monel 400 Cross is also used for Aerospace applications and in Musical instruments. the massive use of Monel 400 Bend is formed within the alkylation units, namely within the reacting section in touch with concentrated acid.
Monel 400 Stub End is approved as a fabric of construction by the ASME Boiler and Pressure Vessel Code. Monel 400 End Cap is typically found in applications in marine engineering, chemical and hydro-carbon processing, valves, and pumps. Monel 400 Dish Cap is nice for seawater applications, where manganese, iron, and silicon are present in smaller amounts. Alloy 400 Butt Weld Pipe Fittings is suggested that the metal supplier be consulted for optimum welding procedures.
Monel 400 Pipe Fittings Specifications
- Buttweld Specifications ASTM B366 / ASME SB366
- Buttweld Size Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″
- Buttweld Standards/Dimensions ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
- Buttweld Type Seamless / Welded / Fabricated
- Buttweld Thickness 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
ASTM B366 Monel 400 Buttweld Fittings Dimensions
Monel 400 Buttweld Pipe Fittings Types
ANSI B16.9 Monel 400 Pipe Fittings Forms & Availability
| Size | Products | |
|---|---|---|
| Sizes 1/2″ – 48″ | ASTM B366 400 Monel Alloy Elbow – Long Radius | ASTM B366 400 Monel Alloy Stub Ends |
| ASTM B366 400 Monel Alloy Elbow – Short Radius | ASTM B366 400 Monel Cross | |
| ASTM B366 400 Alloy 3D Elbow | ASTM B366 400 Monel Alloy 5D Elbow | |
| ASTM B366 400 Monel Alloy Reducing Elbow | ASTM B366 400 Monel Alloy Reducing Cross | |
| ASTM B366 400 Alloy 45° Elbow | ASTM B366 400 Alloy Tees | |
| ASTM B366 400 Monel Alloy Fabricated Tee | ASTM B366 400 Alloy End Cap | |
| ASTM B366 400 Alloy Reducer | ASTM B366 400 Alloy Coupling | |
| ASTM B366 400 Monel Alloy Concentric Reducer | ASTM B366 400 Monel Alloy Eccentric Reducer | |
| ASTM B366 400 Monel Alloy Pipe Nipple | ASTM B366 400 Monel Alloy Welded Pipe Fittings | |
ASTM B366 Monel 400 Buttweld Fittings Standard
| American Steel Pipe Fittings Standard | |
|---|---|
| Standard Code | Standard Name |
| ANSI ASME SA-366 | Forged Durimet pipe fittings |
| ANSI ASME B16.9 | Factory-Made wrought steel pipe fittings |
| ANSI ASME B16.28 | Wrought steel butt-welding short radius elbows and returns |
| ISO 5251 | Monel butt-welding fittings |
| MSS SP-43 | Wrought Monel butt-welding fittings |
| MSS SP-75 | Forging butt-welding fittings |
| Japanese Steel Pipe Fittings Standard | |
| JIS B2311 | Universal steel butt-welding pipe fittings |
| JIS B2312 | Steel butt-welding pipe fittings |
| JIS B2313 | Steel plate butt-welding pipe fittings |
| German Steel Pipe Fittings Standard | |
| DIN 2605 | Steel butt-welding pipe fittings.elbows and bends |
| DIN 2615 | Steel butt-welding pipe fittings.tees |
| DIN 2616 | Steel butt-welding pipe fittings.reducers |
| DIN 2617 | Steel butt-welding pipe fittings.caps |
| Other Steel Pipe Fittings Standard | |
| EN 1025 | 3 Butt-welding pipe fittings |
Manufacturing Standards of Monel 400 Fittings
| ASME B16.9 ASTM B366 400 Pipe Fittings | Factory-Made Wrought Buttwelding Fittings | Long Radius Elbows, Long Radius Reducing Elbows, Long Radius Returns, Short Radius Elbows, Short Radius 180-deg Rerurns, 3D elbows, Straight Tees, Straight Crosses, Reducing Outlet Tees, Reducing Outlet Crosses, Lap Joint Stub Ends, Caps, Reducers |
|---|---|---|
| ASME B16.28 | Short Radius Elbows, Short Radius 180-deg Returns | |
| Mss SP75 | Long Radius Elbows, 3R elbows, straight tees, reducing outlet tees, caps, reducers | |
| MSS SP43 | Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications | Long Radius Elbows, Straight and Reducing-on-the-Outlet Tees, Lap Joint Stub ends, caps, long radius 180 Degree returns, concentric reducers, eccentric reducers |
Equivalent Grades of ASTM B366 Monel 400 Pipe Fittings
| STANDARD | UNS | WERKSTOFF NR. | JIS | BS | AFNOR | GOST | EN |
|---|---|---|---|---|---|---|---|
| Monel 400 | N04400 | 2.4360 | NW 4400 | NA 13 | NU-30M | МНЖМц 28-2,5-1,5 | NiCu30Fe |
Chemical Composition of Alloy 400 Buttweld Fittings
| Grade | C | Fe | S | Cu | Ni | Mn | Si | Cr |
|---|---|---|---|---|---|---|---|---|
| 400 | 0.15 | 6.00 – 10.0 | 0.015 | 0.50 | 72.00 | 1.00 | 0.50 | 14.00 – 17.00 |
Mechanical Properties of Monel 400 Pipe Fittings
| Element | Melting Point | Density | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
|---|---|---|---|---|---|
| Monel 400 | 1350 °C (2460 °F) | 8.8 g/cm3 | Psi – 35,000 , MPa – 240 | Psi – 80,000 , MPa – 550 | 40 % |
Manufacturing Process of Monel 400 Pipe Fittings
Ready Stock of Monel 400 Butt weld Pipe Fittings
| Monel 400 90° LR Elbow | 400 Monel Seamless Pipe Fittings |
| Monel 400 90° Weldable SR Elbow | Alloy UNS N04400 Pipe Reducers |
| ASME B16.9 Monel 400 90° Reducing Elbow | 400 Nickel Alloy Welded Pipe Fittings |
| MSS SP-43 Monel 400 Stub End | ASTM B366 400 Monel Caps |
| Monel NA 13 Pipe Fittings Supplier | B366 400 Two Joint Pipe Fittings |
| ASTM B366 Monel 400 Reducing Tee | ASTM B366 400 Lateral Tee |
| Sch 10 Monel 400 Concentric Reducer | Monel® Alloy 400 Welded Pipe Fittings |
| Sch 80 Nickel Alloy 400 Eccentric Reducer | B366 Grade 400 Industrial Buttweld Pipe Fittings |
| 6 Inch Monel Alloy 400 Buttweld Pipe Fittings | 400 Monel Buttweld Reducing Nipple |
| Monel Alloy 400 Seamless Buttweld Fittings | Sch 80 Monel 400 Pipe Fittings |
| ASTM B366 Monel 400 Eccentric Reducer | ASME B16.9 Monel NiCu30Fe 10D Elbow |
| NiCr15Fe Monel® Alloy Two Joint Pipe Fittings | 400 Monel LR Elbow |
| Alloy 400 Wrought Austenitic 45 Degree Elbow | ASTM B366 400 Welded Pipe Fittings |
| Monel 2.4360 Pipe Fittings Dimensions | Monel NA 13 Buttweld Reducing Nipple |
| Wrought Austenitic Monel 400 Pipe Fittings | ASTM B366 400 Eccentric Reducer |
| Alloy NiCu30Fe Equal Cross | Suppliers of 400 Nickel Alloy End Pipe Cap |
ASTM B366 Alloy 400 Pipe Fitting Classes for Grades
CR : Corrosion resistant grade. S through WU Classes do not apply.
400-S : Seamless
400-W : Welded, Weldable, RT or UT all pipe starting material welds made with filler metal. All fitting manufacturer welds except as excluded in A/SB366
If UT is substituted for RT, all welds must be examined 100% for their length as required by A/SB366
400-WX : RT all welds with or without filler metal.
400-WU : UT all welds with or without filler metal.
grade-grade-class : Insert grades (400) and class (S,W,WX, or WU). Applies to fittings meeting all chemical and physical requirements of both grades.
UNS N04400 Pipe Fittings Application Industries
We Produce full range of Monel Alloy 400 Fittings in every sizes, pressure / classes, dimensions to meet needs of customers. Our Monel 400 Pipe Fittings are well accepted by the majority of customers. it’s widely used in aerospace, shipbuilding, metallurgy, automotive instrumentation, petrochemical, food machinery, biological engineering In the field of environmental protection.
- Refineries
- Food Processing & Dairy
- Oil and Gas Industry
- Off-Shore Oil Drilling Companies
- Pharmaceutical Equipment
- Pulp & Paper Industry
- Power Generation
- Specialty Chemicals
- Sea Water Equipment
- Gas Processing
- Chemical Equipment
- Heat Exchangers
- Petrochemicals
- Pharmaceuticals
- Condensers
Monel 400 Buttweld Fittings Inspection
We at Creative Piping Solutions Pvt. Ltd. ensures that all our material go through strict quality test before dispatching them to our clients. We conduct all necessary test of Monel Alloy 400 Buttweld Pipe Fittings to assure the quality of deliver products to fit clients projects and needs. NDT test used for Monel 400 Buttweld Fittings are Positive material identification (PMI), Penetrating liquids, Ferrite content, Hydrostatic test / hydro testing (pressure testing), Magnetic particles, Macrography, Micrography, Pneumatic pressure, Radiography. All of the listed test, the pressure testing is one of the most commonly specified, especially for mission critical Pipe Fittings in the pipeline.
Monel 400 Pipe Fittings Packing & Forwarding
There are different ways of packing a Monel 400 Fittings, but two principles that are vital for any method to work prevent rusting and Sea transportation security. Our all Monel Alloy 400 Pipe Fittings packed with seaworthy packing method then delivery to customers, usually the packing way include wooden box, wooden pallet. We make sure that it is seaworthy, strong, waterproof and easy for loading and unloading. All shipping and product details also stick to outside of package. Alloy 400 Pipe Fittings pack with environmental poly bags, and then in free fumigation wooden cases or plate. Alloy 400 Buttweld Pipe Fittings are packed in wooden corrugated boxes foiled in bubble wraps and plastic wraps.
ASTM B366 Monel 400 Pipe Fittings Export & Supply to below mentioned Countries
ASIA: Malaysia, India, Taiwan, Cambodia, Singapore, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Myanmar.
SOUTH AMERICA: Venezuela, Argentina, Bolivia, Colombia, Ecuador, Guyana, Paraguay, Uruguay, Brazil, Chile.
AFRICA: South Africa, Nigeria, Algeria, Angola, Libya, Egypt, Gabon, Sudan, Equatorial Guinea, The Republic Of Congo.
NORTH AMERICA: USA, Canada, Mexico, Panama, Costa Rica, Puerto Rico, Trinidad, And Tobago, Jamaica, Bahamas, Denmark.
EUROPE: UK, Netherlands, Russia, Norway, Germany, France, Italy, Spain, Ukraine, Belgium, Greece, Hungary, Albania, Austria, Finland, Ireland, Croatia, Slovenia, Malta, Switzerland, Slovakia, Czech Republic, Portugal.