Inconel 601 Pipe Fittings Manufacturer, ASTM B366 Inconel Alloy 601 Buttweld Fittings
ISO Certified Suppliers and Exporters of ASTM B366 Inconel 601 Buttweld Fittings, UNS N06601 Butt weld Pipe Fittings, WNR 2.4851 Seamless Pipe Fittings, ASME SB366 Inconel 601 Welded Butt weld Fittings, Werkstoff no 2.4851 Pipe Fittings, ANSI B16.9 Inconel 601 SR Elbow, Nickel Alloy 601 Pipe Fittings, UNS N06601 Pipe Elbow in India.
- Inconel 601 Pipe Fittings Specifications
- ASTM B366 Inconel 601 Buttweld Fittings Dimensions
- Inconel 601 Buttweld Pipe Fittings Types
- ANSI B16.9 Inconel 601 Pipe Fittings Forms & Availability
- ASTM B366 Inconel 601 Buttweld Fittings Standard
- Manufacturing Standards of Inconel 601 Fittings
- Equivalent Grades of ASTM B366 Inconel 601 Pipe Fittings
- Chemical Composition of Alloy 601 Buttweld Fittings
- Mechanical Properties of Inconel 601 Pipe Fittings
- Manufacturing Process of Inconel 601 Pipe Fittings
- Ready Stock of Inconel 601 Butt weld Pipe Fittings
- ASTM B366 Alloy 601 Pipe Fitting Classes for Grades
- UNS N06601 Pipe Fittings Application Industries
- Inconel 601 Buttweld Fittings Inspection
- Inconel 601 Pipe Fittings Packing & Forwarding
Largest Stockists of Inconel 601 Equal Tee, Werkstoff No 2.4851 Buttweld Elbow, ASTM B366 601 Buttweld Fittings, Inconel WNR 2.4851 Buttweld Cross, ANSI B16.9 Inconel Alloy 601 Buttweld Pipe Bend, JIS NCF 601 Dish Cap, DIN 2.4851 Butt weld Reducer, GOST XH60BT Two Joint Pipe Fittings, AFNOR NC23FeA Collar Pipe Fittings, EN NiCr23Fe Buttweld Pipe Cap, BS NA 49 Long Stub End, ASME SB366 Inconel Alloy 601 Fittings.
Creative Piping Solutions is a Manufacturer, Supplier, and, Exporter of Inconel Alloy 601 Pipe Fittings, which is hardened and strengthened through a cold work process. Inconel 601 Butt Weld Fittings is approved as a fabric of construction by the ASME Boiler and Pressure Vessel Code. Inconel 601 Buttweld Elbow is usually used for tube supports and ashtrays within the power generation industry. Inconel 601 Buttweld Tee is additionally used for catalyst support grids in acid production, and steam super-heater tube supports.
Inconel 601 Buttweld Reducer is also used for thermocouple protection tubes, rotary kilns, and calcines. Inconel 601 Buttweld Cross is usually utilized in high-temperature static applications, like petrochemical and other process equipment, alongside gas-turbine components. Inconel 601 Buttweld Bend also can be utilized in chemical change equipment which incorporates combustor components, process heaters, and condenser tubes.
Alloy 601 Buttweld Stub End is also utilized in the Vitrification of nuclear waste, Nuclear waste transport tank lining. The welding method and filler metals utilized in Inconel 601 Buttweld End Cap are dependent upon the service conditions to which the ultimate fabricated part is subjected. Inconel 601 Buttweld Dish Cap has outstanding thermal and electrical properties also because it is simple to use. Inconel UNS N06601 Pipe Fittings is a construction alloy for warmth treat furnace fixtures and components like annealing tubes, muffles, and flame shields.
Inconel 601 Pipe Fittings Specifications
- Buttweld Specifications ASTM B366 / ASME SB366
- Buttweld Size Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″
- Buttweld Standards/Dimensions ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
- Buttweld Type Seamless / Welded / Fabricated
- Buttweld Thickness 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
ASTM B366 Inconel 601 Buttweld Fittings Dimensions
Inconel 601 Buttweld Pipe Fittings Types
ANSI B16.9 Inconel 601 Pipe Fittings Forms & Availability
| Size | Products | |
|---|---|---|
| Sizes 1/2″ – 48″ | ASTM B366 601 Inconel Alloy Elbow – Long Radius | ASTM B366 601 Inconel Alloy Stub Ends |
| ASTM B366 601 Inconel Alloy Elbow – Short Radius | ASTM B366 601 Inconel Cross | |
| ASTM B366 601 Alloy 3D Elbow | ASTM B366 601 Inconel Alloy 5D Elbow | |
| ASTM B366 601 Inconel Alloy Reducing Elbow | ASTM B366 601 Inconel Alloy Reducing Cross | |
| ASTM B366 601 Alloy 45° Elbow | ASTM B366 601 Alloy Tees | |
| ASTM B366 601 Inconel Alloy Fabricated Tee | ASTM B366 601 Alloy End Cap | |
| ASTM B366 601 Alloy Reducer | ASTM B366 601 Alloy Coupling | |
| ASTM B366 601 Inconel Alloy Concentric Reducer | ASTM B366 601 Inconel Alloy Eccentric Reducer | |
| ASTM B366 601 Inconel Alloy Pipe Nipple | ASTM B366 601 Inconel Alloy Welded Pipe Fittings | |
ASTM B366 Inconel 601 Buttweld Fittings Standard
| American Steel Pipe Fittings Standard | |
|---|---|
| Standard Code | Standard Name |
| ANSI ASME SA-366 | Forged Durimet pipe fittings |
| ANSI ASME B16.9 | Factory-Made wrought steel pipe fittings |
| ANSI ASME B16.28 | Wrought steel butt-welding short radius elbows and returns |
| ISO 5251 | Inconel butt-welding fittings |
| MSS SP-43 | Wrought Inconel butt-welding fittings |
| MSS SP-75 | Forging butt-welding fittings |
| Japanese Steel Pipe Fittings Standard | |
| JIS B2311 | Universal steel butt-welding pipe fittings |
| JIS B2312 | Steel butt-welding pipe fittings |
| JIS B2313 | Steel plate butt-welding pipe fittings |
| German Steel Pipe Fittings Standard | |
| DIN 2605 | Steel butt-welding pipe fittings.elbows and bends |
| DIN 2615 | Steel butt-welding pipe fittings.tees |
| DIN 2616 | Steel butt-welding pipe fittings.reducers |
| DIN 2617 | Steel butt-welding pipe fittings.caps |
| Other Steel Pipe Fittings Standard | |
| EN 1025 | 3 Butt-welding pipe fittings |
Manufacturing Standards of Inconel 601 Fittings
| ASME B16.9 ASTM B366 601 Pipe Fittings | Factory-Made Wrought Buttwelding Fittings | Long Radius Elbows, Long Radius Reducing Elbows, Long Radius Returns, Short Radius Elbows, Short Radius 180-deg Rerurns, 3D elbows, Straight Tees, Straight Crosses, Reducing Outlet Tees, Reducing Outlet Crosses, Lap Joint Stub Ends, Caps, Reducers |
|---|---|---|
| ASME B16.28 | Short Radius Elbows, Short Radius 180-deg Returns | |
| Mss SP75 | Long Radius Elbows, 3R elbows, straight tees, reducing outlet tees, caps, reducers | |
| MSS SP43 | Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications | Long Radius Elbows, Straight and Reducing-on-the-Outlet Tees, Lap Joint Stub ends, caps, long radius 180 Degree returns, concentric reducers, eccentric reducers |
Equivalent Grades of ASTM B366 Inconel 601 Pipe Fittings
| STANDARD | UNS | WERKSTOFF NR. | GOST | AFNOR | JIS | BS | EN |
|---|---|---|---|---|---|---|---|
| Inconel 601 | N06601 | 2.4851 | XH60BT | NC23FeA | NCF 601 | NA 49 | NiCr23Fe |
Chemical Composition of Alloy 601 Buttweld Fittings
| Grade | C | S | Cu | Fe | Mn | Si | Ni | Cr |
|---|---|---|---|---|---|---|---|---|
| Inconel 601 | 0.15 max | 0.015max | 1.0 max | balance | 1.00 max | 0.50 max | 58.0-63.0 | 21.0-25.0 |
Mechanical Properties of Inconel 601 Pipe Fittings
| Element | Density | Tensile Strength | Melting Point | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|---|---|---|
| Inconel 601 | 8.1 g/cm3 | Psi – 80,000 , MPa – 550 | 1411 °C (2571 °F) | Psi – 30,000 , MPa – 205 | 30 % |
Manufacturing Process of Inconel 601 Pipe Fittings
Ready Stock of Inconel 601 Butt weld Pipe Fittings
| Inconel 601 90° LR Elbow | 601 Inconel Seamless Pipe Fittings |
| Inconel 601 90° Weldable SR Elbow | Alloy UNS N06601 Pipe Reducers |
| ASME B16.9 Inconel 601 90° Reducing Elbow | 601 Nickel Alloy Welded Pipe Fittings |
| MSS SP-43 Inconel 601 Stub End | ASTM B366 601 Inconel Caps |
| Inconel NA 49 Pipe Fittings Supplier | B366 601 Two Joint Pipe Fittings |
| ASTM B366 Inconel 601 Reducing Tee | ASTM B366 601 Lateral Tee |
| Sch 10 Inconel 601 Concentric Reducer | Inconel® Alloy 601 Welded Pipe Fittings |
| Sch 80 Nickel Alloy 601 Eccentric Reducer | B366 Grade 601 Industrial Buttweld Pipe Fittings |
| 6 Inch Inconel Alloy 601 Buttweld Pipe Fittings | 601 Inconel Buttweld Reducing Nipple |
| Inconel Alloy 601 Seamless Buttweld Fittings | Sch 80 Inconel 601 Pipe Fittings |
| ASTM B366 Inconel 601 Eccentric Reducer | ASME B16.9 Inconel NiCr23Fe 10D Elbow |
| NiCr23Fe Inconel® Alloy Two Joint Pipe Fittings | 601 Inconel LR Elbow |
| Alloy 601 Wrought Austenitic 45 Degree Elbow | ASTM B366 601 Welded Pipe Fittings |
| Inconel 2.4851 Pipe Fittings Dimensions | Inconel NA 49 Buttweld Reducing Nipple |
| Wrought Austenitic Inconel 601 Pipe Fittings | ASTM B366 601 Eccentric Reducer |
| Alloy NiCr23Fe Equal Cross | Suppliers of 601 Nickel Alloy End Pipe Cap |
ASTM B366 Alloy 601 Pipe Fitting Classes for Grades
CR : Corrosion resistant grade. S through WU Classes do not apply.
601-S : Seamless
601-W : Welded, Weldable, RT or UT all pipe starting material welds made with filler metal. All fitting manufacturer welds except as excluded in A/SB366
If UT is substituted for RT, all welds must be examined 100% for their length as required by A/SB366
601-WX : RT all welds with or without filler metal.
601-WU : UT all welds with or without filler metal.
grade-grade-class : Insert grades (601) and class (S,W,WX, or WU). Applies to fittings meeting all chemical and physical requirements of both grades.
UNS N06601 Pipe Fittings Application Industries
We Produce full range of Inconel Alloy 601 Fittings in every sizes, pressure / classes, dimensions to meet needs of customers. Our Inconel 601 Pipe Fittings are well accepted by the majority of customers. it’s widely used in aerospace, shipbuilding, metallurgy, automotive instrumentation, petrochemical, food machinery, biological engineering In the field of environmental protection.
- Refineries
- Food Processing & Dairy
- Oil and Gas Industry
- Off-Shore Oil Drilling Companies
- Pharmaceutical Equipment
- Pulp & Paper Industry
- Power Generation
- Specialty Chemicals
- Sea Water Equipment
- Gas Processing
- Chemical Equipment
- Heat Exchangers
- Petrochemicals
- Pharmaceuticals
- Condensers
Inconel 601 Buttweld Fittings Inspection
We at Creative Piping Solutions Pvt. Ltd. ensures that all our material go through strict quality test before dispatching them to our clients. We conduct all necessary test of Inconel Alloy 601 Buttweld Pipe Fittings to assure the quality of deliver products to fit clients projects and needs. NDT test used for Inconel 601 Buttweld Fittings are Positive material identification (PMI), Penetrating liquids, Ferrite content, Hydrostatic test / hydro testing (pressure testing), Magnetic particles, Macrography, Micrography, Pneumatic pressure, Radiography. All of the listed test, the pressure testing is one of the most commonly specified, especially for mission critical Pipe Fittings in the pipeline.
Inconel 601 Pipe Fittings Packing & Forwarding
There are different ways of packing a Inconel 601 Fittings, but two principles that are vital for any method to work prevent rusting and Sea transportation security. Our all Inconel Alloy 601 Pipe Fittings packed with seaworthy packing method then delivery to customers, usually the packing way include wooden box, wooden pallet. We make sure that it is seaworthy, strong, waterproof and easy for loading and unloading. All shipping and product details also stick to outside of package. Alloy 601 Pipe Fittings pack with environmental poly bags, and then in free fumigation wooden cases or plate. Alloy 601 Buttweld Pipe Fittings are packed in wooden corrugated boxes foiled in bubble wraps and plastic wraps.
ASTM B366 Inconel 601 Pipe Fittings Export & Supply to below mentioned Countries
ASIA: Malaysia, India, Taiwan, Cambodia, Singapore, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Myanmar.
SOUTH AMERICA: Venezuela, Argentina, Bolivia, Colombia, Ecuador, Guyana, Paraguay, Uruguay, Brazil, Chile.
AFRICA: South Africa, Nigeria, Algeria, Angola, Libya, Egypt, Gabon, Sudan, Equatorial Guinea, The Republic Of Congo.
NORTH AMERICA: USA, Canada, Mexico, Panama, Costa Rica, Puerto Rico, Trinidad, And Tobago, Jamaica, Bahamas, Denmark.
EUROPE: UK, Netherlands, Russia, Norway, Germany, France, Italy, Spain, Ukraine, Belgium, Greece, Hungary, Albania, Austria, Finland, Ireland, Croatia, Slovenia, Malta, Switzerland, Slovakia, Czech Republic, Portugal.